How to Test Your Brake Lights Before Driving Lessons

Book Now

Published On 16/11/2026

No Yelling - Driving School

How to Test Your Brake Lights Before Driving Lessons

Brake lights are an important part of vehicle safety. They tell drivers behind you when you are slowing down or coming to a stop. Without working brake lights, other road users may not realise that your vehicle is slowing down. This can increase the risk of a rear-end crash, especially on busy roads.

For learner drivers, checking brake lights is a simple habit worth developing before every trip. It helps you understand your vehicle better and prepares you for the basic safety checks that come with responsible driving.

In Brisbane, where traffic can become busy around school zones, shopping areas, intersections, and major roads, working brake lights are essential. Whether you are practising with a parent or taking professional driving lessons, knowing how to test your brake lights can help you stay safe and confident behind the wheel.

Here are some simple ways to check your brake lights before setting off.

Understand What Your Brake Lights Do

Before testing your brake lights, it helps to understand their purpose.

Brake lights are the red lights at the rear of your vehicle that come on when you press the brake pedal. They warn drivers behind you that you are slowing down or stopping.

Most modern cars have three brake lights:

One on the left rear.

One on the right side at the rear.

A third brake light, usually fitted near the top of the rear window or on the boot.

All fitted brake lights should work properly. If one stops working, drivers behind you may not receive a clear warning when you apply the brakes.

Queensland vehicle standards require brake lights to show a red light visible from at least 30 metres behind the vehicle. You can read more in the Queensland Government's vehicle standards and safety regulations.

Ask Someone to Help You Check the Lights

One of the easiest ways to test your brake lights is to ask another person to stand behind your car.

You can ask a parent, supervising driver, or another responsible adult to help you.

Follow these steps:

Park your vehicle on level ground in a safe place.

Apply the parking brake.

Select Park if you are driving an automatic car, or Neutral if you are driving a manual car.

Ask the person helping you to stand a safe distance behind the vehicle.

Press and hold the brake pedal.

Ask them to check whether all three brake lights come on.

Release the pedal and confirm that the brake lights go off.

The person checking should look at both rear lights and the centre brake light, if fitted.

If all the lights come on when you press the pedal, that is a good sign. However, you should still check for cracks, faded lenses, or lights that appear dim.

Use a Reflection to Test Your Brake Lights

What if nobody is available to help you?

You can use the reflection of your vehicle's brake lights to check whether they are working.

A garage door, smooth wall, or another flat surface may reflect the red light from your vehicle.

Here is how to do it:

Park facing away from a suitable flat surface.

Make sure the area is clear and the vehicle is safely parked.

Press and hold the brake pedal.

Look at the reflection in the surface behind the vehicle.

Check whether the left, right, and centre brake lights appear.

You can also use your phone to record a short video of the rear of your car while safely pressing the brake pedal. Review the recording to see whether all the lights work.

These methods are useful when you do not have another person available, but a direct visual check is still best.

Check for Dim or Damaged Brake Lights

Sometimes, a brake light may still come on but may not be bright enough.

A dim light can be harder for other drivers to notice, especially during bright daylight or heavy rain.

Look for these warning signs:

One brake light looks dimmer than the other.

The red lens is faded or discoloured.

The light flickers when you press the brake pedal.

There are cracks in the light cover.

Water or moisture has collected inside the light fitting.

Also, check that the brake lights are clearly brighter than the normal rear tail lights when the brakes are applied.

If you notice any of these problems, arrange for a qualified mechanic to inspect the vehicle.

Know the Difference Between Brake Lights and Tail Lights

Brake lights and tail lights are both fitted at the rear of your vehicle, but they serve different purposes.

Tail lights come on when you switch on your headlights or parking lights. They help other drivers see your vehicle at night and during poor weather.

Brake lights come on when you press the brake pedal. They warn drivers behind you that you are slowing down or stopping.

Some vehicles use the same light fitting for both functions. However, the brake light should become brighter when you press the pedal.

During your checks, make sure you can tell the difference between the two. This will help you notice when a brake light is not working properly.

What to Do If Your Brake Lights Are Not Working

If one or more brake lights fail, do not ignore the problem. Working brake lights are important for safe driving and are part of Queensland's vehicle safety requirements.

A faulty brake light may be caused by:

A burnt-out bulb.

A blown fuse.

Loose or damaged wiring.

A faulty brake light switch.

A damaged light fitting.

Some problems are easy to fix, while others need professional attention. Check your vehicle's manual before attempting any repairs.

If your brake lights are not working, arrange for a qualified mechanic or auto electrician to inspect them before driving. Do not assume the vehicle is safe because the other lights still work.

The Queensland Government's Light Vehicle Inspection Manual also explains what inspectors look for when checking vehicle lighting.

Make Brake Light Checks Part of Your Driving Routine

Checking your brake lights should become part of your regular vehicle safety routine. It is a simple task that takes only a few minutes but can make a difference to your safety.

Parents supervising teenagers can make this check part of their pre-driving routine. Rather than doing everything for the learner, allow them to take part in checking the vehicle. This helps them understand their responsibilities as drivers.

During driving lessons, learners should also become familiar with basic vehicle checks. A good instructor can explain how brake lights, indicators, headlights, and other safety features work.

If you are preparing for your driving test, remember that knowing your vehicle is part of being a responsible driver. The Queensland driving assessment includes checks of important vehicle features, including brake lights.

At No Yelling Driving School, learning goes beyond steering, changing gears, and following road signs. Understanding basic vehicle safety helps learners become more aware, prepared, and confident on the road.

Before your next practice session, take a few minutes to check your brake lights. Make sure they come on when you press the pedal, look bright and clear, and have no visible damage. These small checks can help you build good habits that last long after you get your licence.